equipment:ups2
Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision Next revision | Previous revision | ||
|
equipment:ups2 [2016/03/21 15:15] walter |
equipment:ups2 [2021/05/02 21:36] (current) |
||
|---|---|---|---|
| Line 9: | Line 9: | ||
| Model: \\ | Model: \\ | ||
| Series: \\ | Series: \\ | ||
| - | + | Datasheet: {{:equipment:smart2600rm2u_tripp_lite_datasheet_212247541444983440121.pdf}} | |
| - | + | ||
| - | + | ||
| - | ===== Quick Info ===== | + | |
| - | + | ||
| - | ^ Output ^ ^ | + | |
| - | | Output Volt Amp Capacity (VA) | 2600 | | + | |
| - | | Output kVA Capacity (kVA) | 2.6 | | + | |
| - | | Output Watt Capacity (Watts) | 1920 | | + | |
| - | | Output kW Capacity (kW) | 1.92 | | + | |
| - | | Power Factor | 0.87 | | + | |
| - | | Nominal Output Voltage(s) Supported | 110V; 115V; 120V | | + | |
| - | | Nominal Voltage Details | 120v nominal output in battery mode | | + | |
| - | | Frequency Compatibility | 60 Hz | | + | |
| - | | Output Voltage Regulation (Line Mode) | -14%, +6% | | + | |
| - | | Output Voltage Regulation (Battery Mode) | +/- 5% | | + | |
| - | | Output Receptacles | (4) 5-15R; (4) 5-15/20R; (1) L5-20R | | + | |
| - | | Load Management Receptacles | Two switchable single-outlet 5-15R load banks | | + | |
| - | | Output Circuit Breakers | 15A breaker protects 5-15R, 20A breaker protects 5-15/20R, L5-20R is unbreakered | | + | |
| - | | Output AC Waveform (AC Mode) | Sine wave | | + | |
| - | | Output AC Waveform (Battery Mode) | Pure Sine wave | | + | |
| - | + | ||
| - | + | ||
| - | ^ Input ^ ^ | + | |
| - | | Rated input current (Maximum Load) | 16A | | + | |
| - | | Nominal Input Voltage(s) Supported | 120V AC | | + | |
| - | | UPS Input Connection Type | 5-20P | | + | |
| - | | UPS Input Cord Length (ft.) | 10 | | + | |
| - | | Recommended Electrical Service | 20A 120V | | + | |
| - | | Input Phase | Single-Phase | | + | |
| - | + | ||
| - | ^ Battery ^ ^ | + | |
| - | | Full Load Runtime (min.) | 4.6 min. (1920w) | | + | |
| - | | Half Load Runtime (min.) | 12.9 min. (960w) | | + | |
| - | | Expandable Battery Runtime | Extended runtime supported via optional external battery packs | | + | |
| - | | External Battery Pack Compatibility | BP48V24-2U(limit 1); BP48V60RT-3U(multi-pack compatible); BP48V27-2US(multi-pack compatible) | | + | |
| - | | DC System Voltage (VDC) | 48 | | + | |
| - | | Battery Recharge Rate (Included Batteries) | Less than 4.5 hours from 10% to 90% (typical, full load discharge) | | + | |
| - | | Internal UPS Replacement Battery Cartridge | [[http://www.tripplite.com/2U-UPS-Replacement-48VDC-Battery-Cartridge-1-Set-of-4-for-Select-Tripp-Lite-SmartPro-UPS~RBC94-2U|RBC94-2U]] | | + | |
| - | | Battery Access | Front panel battery access door | | + | |
| - | | Battery Replacement Description | Hot-swappable, user replaceable batteries | | + | |
| - | | Expandable Runtime | Yes | | + | |
equipment/ups2.txt · Last modified: 2021/05/02 21:36 (external edit)
Page Tools
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Noncommercial-Share Alike 4.0 International
