This shows you the differences between two versions of the page.
equipment:ups2 [2016/03/14 17:04] walter created |
equipment:ups2 [2021/05/02 21:36] |
||
---|---|---|---|
Line 1: | Line 1: | ||
- | ====== UPS 1 ====== | ||
- | Manufacturer: Tripp-Lite \\ | ||
- | Model: SMART2600RM2U \\ | ||
- | Series:AGSM4842 \\ | ||
- | |||
- | [[http://www.tripplite.com/line-interactive-sine-wave-ups-system-2.6kva-snmp-2u-rack-tower-usb-rs232-epo-extended-runtime-120v~SMART2600RM2U/|Product Page]] | ||
- | |||
- | ====== Quick Info ====== | ||
- | |||
- | ^ Output ^ ^ | ||
- | | Output Volt Amp Capacity (VA) | 2600 | | ||
- | | Output kVA Capacity (kVA) | 2.6 | | ||
- | | Output Watt Capacity (Watts) | 1920 | | ||
- | | Output kW Capacity (kW) | 1.92 | | ||
- | | Power Factor | 0.87 | | ||
- | | Nominal Output Voltage(s) Supported | 110V; 115V; 120V | | ||
- | | Nominal Voltage Details | 120v nominal output in battery mode | | ||
- | | Frequency Compatibility | 60 Hz | | ||
- | | Output Voltage Regulation (Line Mode) | -14%, +6% | | ||
- | | Output Voltage Regulation (Battery Mode) | +/- 5% | | ||
- | | Output Receptacles | (4) 5-15R; (4) 5-15/20R; (1) L5-20R | | ||
- | | Load Management Receptacles | Two switchable single-outlet 5-15R load banks | | ||
- | | Output Circuit Breakers | 15A breaker protects 5-15R, 20A breaker protects 5-15/20R, L5-20R is unbreakered | | ||
- | | Output AC Waveform (AC Mode) | Sine wave | | ||
- | | Output AC Waveform (Battery Mode) | Pure Sine wave | | ||
- | |||
- | |||
- | ^ Input ^ ^ | ||
- | | Rated input current (Maximum Load) | 16A | | ||
- | | Nominal Input Voltage(s) Supported | 120V AC | | ||
- | | UPS Input Connection Type | 5-20P | | ||
- | | UPS Input Cord Length (ft.) | 10 | | ||
- | | Recommended Electrical Service | 20A 120V | | ||
- | | Input Phase | Single-Phase | |