User Tools

Site Tools



This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
network:wireless [2016/02/01 23:23]
network:wireless [2018/01/30 15:52] (current)
clee231 Adding Windows 10 Instructions
Line 1: Line 1:
 ====== ACM Wireless ====== ====== ACM Wireless ======
-<WRAP left round important ​50%>+<WRAP left round important ​65%>
 Make sure your wireless MAC has been [[network:​mac_address_filtering|registered on the ACM network]] Make sure your wireless MAC has been [[network:​mac_address_filtering|registered on the ACM network]]
 </​WRAP>​ </​WRAP>​
 +This page explains how ACM members, and authorized guests, can setup access to the ACM's internal WiFi network. This network shares similar properties as the LAN network, but is located on a different subnet. If you are trying to add wireless access for an device owned and managed by the ACM, please instead reference to [[network:​wireless_for_acm_machines|this page]] as the procedures are not identical. ​
 ---- ----
Line 31: Line 33:
   - Enter your ACM username and password   - Enter your ACM username and password
   - Connect   - Connect
 +===== Game Consoles =====
 +Many game consoles do not support enterprise authentication methods. As a result, these consoles must use consumer authentication methods. This method still requires you to be registered on the ACM network. These methods have been tested on Nintendo 3DS, Nintendo Switch, and PS4. 
 +You will need to enter manual WiFi setup on your respective console.
 +  * Name: ACM-3DS ​
 +  * SSID: ACM-Hidden  ​
 +  * Security: WPA2-PSK (AES)  ​
 +  * Password: <Please ask a sysadmin, in-person>  ​
 ===== Linux ===== ===== Linux =====
Line 51: Line 65:
 ===== Windows 7 ===== ===== Windows 7 =====
-<WRAP center round tip 30%> 
-Windows 8/8.1 should be about the same procedure with a different interface to get to the initial dialogs ​ 
Line 95: Line 105:
 Connect to the wireless network and enter your ACM username and password when prompted Connect to the wireless network and enter your ACM username and password when prompted
 +===== Windows 8/8.1/10 =====
 +Windows 8 and above should now automatcally detect, download the certificate,​ and configure your settings automatically. If not, follow the procedures for Windows 7.
 +  - Select "​ACM"​ under your WiFi list.
 +  - Type in your ACM Username and Password.
 +  - Press Connect.
 === Signage === === Signage ===
network/wireless.1454390584.txt.gz · Last modified: 2016/02/01 23:23 by walter